SWMC-X45-DTH Cikakken Na'urar Haɗa Ruwan Ruwa
● SIFFOFI
An yi amfani da shi don quarry, buɗaɗɗen rami nawa
Ramin diamita: 90-130mm
SWMC DRILL ya mai da hankali kan kera na'urorin hakowa sama da shekaru 25.SWMC-X45-DTH na'ura mai aiki da karfin ruwa kasa-da-rami hakowa na'ura mai aiki da karfin ruwa amfani abũbuwan amfãni daga da yawa model, high dace, makamashi ceto, da kuma muhalli kariya.Ya dace da ayyukan fashewa a cikin ma'adinan buɗaɗɗen ramuka da quaries tare da duwatsun taurin daban-daban a cikin kewayon diamita na 90-130mm.
Wannan inji za a iya sanye take da BSC ko shigo da Sullivan-Palatek biyu-mataki dunƙule iska compressor, tare da yalwar kwarara, barga matsa lamba, sauri perforation gudun, makamashi-ceton da man fetur-ceton;yana ɗaukar injin Yuchai EFI na daidaitattun watsi da ƙasa III.Na'urar haɗa na'ura mai aiki da ruwa ta atomatik da na'urar zazzage sanda yana da sauƙi kuma mai sauƙin aiki.Ɗauki Eton shigo da motsi da injin ɗagawa, haɗaɗɗen ƙirar mota da birki, babban ƙarfin fitarwa, ƙaramin tsari, aminci kuma abin dogaro;Abubuwan da aka shigo da na'ura mai aiki da karfin ruwa abin dogaro ne, dorewa, ƙarancin gazawa da sauƙin kulawa.Ƙwararriyar girgiza da aka sanya a gaban shugaban wutar lantarki yana kara tsawon rayuwar sabis na tsarin jujjuya da mai tasiri, kuma yana rage lalacewa da tsagewar zaren rawar soja;babban manganese karfe nunin dogo yana da mafi kyawun juriya kuma mafi dorewa.
Mai canza sanda ta atomatik
Mai canza hawan keke ta atomatik, adadin adadin ajiya shine guda 5 + 1. Tsarin daidaitaccen tsari shine 3m rawar soja.(Zaɓi sandar rawar soja 4m)
Yana ɗaukar tsarin Maltese, ɗakin karatu mai jujjuyawar sanda yana motsa shi da mota, kuma mai sarrafa sandar manipulator yana sarrafa shi ta silinda mai.Ayyukan yana da sauƙi kuma mai sauƙi don amfani, kuma ƙarancin gazawar yana da ƙasa.Yana ceton ku matsala na haɗin hannu akai-akai da sauke sanduna, sarrafawa mai sauƙi da sassauƙa, yana rage yawan ma'aikata, yana kawar da haɗari na aminci, da kuma rage farashin zuba jari kai tsaye.
Cab
Taksi yana ba da fa'ida, jin daɗi da yanayin aiki mai aminci ga mai aiki.Yana da hangen nesa mai kyau na hakowa, ƙirar ƙira mai mahimmanci na maɓallan sarrafawa na lantarki da na'urorin lantarki, shimfidar wuri mai ma'ana, da sauƙi da sauƙi don sarrafawa.
Inji
Injin yana ɗaukar injin Guangxi Yuchai EFI mai ƙarfin 191Kw da ƙa'idodin fitar da iska guda uku na ƙasa, wanda yake da inganci sosai kuma yana da alaƙa da muhalli.Fasahar daidaitawa ta atomatik na saurin injin yana da alaƙa da tanadin mai da kariyar muhalli.Ana sarrafa tsarin allura ta atomatik. Ana amfani da iskar da aka matse don zubar da tace iskar ta atomatik lokacin da aka kashe wutar a kowace rana.Ƙirar tana guje wa gurɓataccen gurɓataccen abu wanda ya haifar da zubar da hannu kuma yana rage lokacin kulawa na rig.
Kwampreso na iska
An daidaita na'urar damfara da BSC ko Sullivan-Palatek da aka shigo da na'urar bugun iska mai hawa biyu.Matsin iska mai fitarwa shine 1.7Mpa kuma ƙaura shine 14m³/min.Lokacin hako ramukan 90-140mm, yana da ƙarancin amfani da makamashi da kuma babban gudu.An sanye shi tare da sauke fasahar sarrafawa ta atomatik don rage yawan mai.
Motar tafiya
Motar tafiya mai inganci tana dacewa da 350mm faɗaɗa takalman waƙa mai ƙarfi guda ɗaya, wanda ke da ƙarfi mai ƙarfi da ƙima da ingantaccen tsarin tafiya.Chassis yana ɗaukar tsarin daidaita ma'aunin ruwa, wanda ke da ƙarfin daidaitawa ga yanayin aiki kuma yana da dorewa.
Na'urar cire ƙura
Matsakaicin daidaitaccen tsari na 16-filter biyu-mataki busassun tsarin kawar da ƙura mai inganci (na zaɓi zaɓin babban tsarin cire ƙurar ruwa) ya sadu da buƙatun kare muhalli na ƙasa, wanda ke rage ƙura yadda yakamata, wanda ba wai kawai yana kare yanayin aiki ba, har ma. yana hana kura daga cutar da ma'aikata.Mai sarrafa bugun jini na iya sarrafa daidai lokacin busawa na nau'in tacewa, kuma ginanniyar kayan tacewa mai inganci yana haɓaka ikon tattara ƙura.
● Ƙididdigar SWMC-X45-DTH
| Inji | Nau'in | Saukewa: YC07A260-301 |
| Matsayin fitarwa | Matakin Kasa-III | |
| Ƙarfi | 191KW | |
| Karfin tankin mai | 550 | |
| Ƙarfafawa | bugun jini | mm 4115 |
| Saurin turawa | Matsakaicin 60m/min | |
| Ƙarfin ɗagawa | 20KN | |
| Rotary Power | Juyawa gudun | 0-140 Rpm |
| Torque | 3400N.m | |
| Angle Aiki | Haɓaka Haɓaka Sama/Ƙasa | 56°/23° |
| Haɗa Hagu / Dama | 15°/35° | |
| Karusa Hagu/Dama | 90°/31° | |
| Ramin rami | Diamita | 90-140 mm |
| Sanda | Diamita | 76/89 mm |
| Tsawon | 3000mm (na zaɓi 4000mm) | |
| Lambar Sanda | 5+1 | |
| Tsabtace Sufuri | Tsawon | mm 9400 |
| Nisa | 2400mm | |
| Tsayi | 3500mm | |
| Nauyi | 13500 kg | |
| Sigar tsarin tafiya | Track nisa | mm 350 |
| Girmamawa | 30° | |
| Gudu | 0-2.5km/h | |
| Fitar ƙasa | mm 420 | |
| Jiki yana iyo | ± 6° | |
| Cire kura | Gudun jujjuyawar mota | 3700rpm |
| Tace yankin | 20㎡ | |
| Compressor | Mai ƙira | BSC/Sullivan-Palatek |
| Yawo | 14m³/min | |
| matsa lamba | 1.7Mpa | |
| Yanayin aiki | Yanayin yanayi | -35/50 ℃ |
| Tsayi | ≤3000m | |
